Traditional WPC Decking with 3D Wood Grain

Traditional WPC deck panels (wood plastic composite deck panels) have multiple significant characteristics, especially when their surface treatment is 3D wood grain:

Durability: WPC deck panels typically have a long service life of over 25 years, thanks to their weather resistance and UV resistance.

Natural appearance: The 3D wood grain treatment makes the surface of the WPC deck panel look like real wood, with rich textures and colors, enhancing its aesthetics.

Traditional WPC deck panels combine the natural beauty of wood with the durability of plastic, combined with 3D wood grain treatment, making them a practical and aesthetically pleasing outdoor paving material.

Traditional WPC Decking With 3D Wood Grain is suitable for use in a wide range of outdoor settings including: terraces and balconies, garden walkways, swimming pool edges, parks and playgrounds, and commercial walkways. In summary, it is a versatile, durable and easy-to-maintain outdoor flooring option that is suitable for use in a wide range of outdoor environments.

 

 

When installing Traditional WPC Decking With 3D Wood Grain, you need to pay attention to the following key points:

Ground treatment: ensure that the grass-roots level of the construction site ground level, the height difference of the base surface is controlled within 10mm; keel end butt joints need to leave a spacing of about 10mm, to facilitate drainage, and at the same time to do the keel rows and rows of end butt joints between the staggered, don't in a straight line. Allowable error of keel spacing in 10mm, flatness is less than 3mm, and wall expansion joints for 8-10mm.

Installation of pre-construction preparation: before starting the installation work, be sure to keep the plastic wood flooring dry, flat, clean and good condition, so as to better ensure that the subsequent installation work goes smoothly. Preparation for the installation of tools drills, ordinary carpentry tools, labor insurance gloves, stainless steel screws, etc., of which the drill is a necessary tool for the installation of plastic wood flooring. Plastic wood flooring brittle, when fixing the floor and keel, you must use the electric drill to lead the hole, and then loaded with screws to avoid damage to the plastic wood flooring.

Fixed wood-plastic flooring details: due to the wood-plastic material itself is dense, in the use of self-tapping screws in the position need to drill pilot holes, in the self-tapping screws fastening. Plastic wood flooring and keel of the intersection of the two are connected with plastic clips.

The keel laid out to be flat, the spacing should be reasonable: in order to wood-plastic flooring service life longer, grass-roots keel laying is particularly important, the more flat the laying, the more uniform the floor's force, not easy to step on the bad, the smaller the keel spacing, generally not less than 30cm, planks load-bearing capacity, according to the use of the environment and the environment where it is located, the reasonable spacing of the laying.

Pay attention to the weather factor: after drying the plate, six-sided sealing paint, the floor inside the water content is very low, but the installation will always cut the floor, rainy day air humidity, moisture into the floor, it will make the floor of the water content increases, will leave hidden dangers for the floor after the safety. So the weather factor should not be ignored when installing.

Use special tools: in the installation process, special tools and accessories should be used, such as plastic clips or self-tapping screws, to ensure the stability and durability of the floor.

 

 

Populární Tagy: traditional WPC decking with 3D wood grain, China traditional WPC decking with 3D wood grain suppliers, factory